Chances are you have some type of device mounted on your windshield or dash. GPS, radar detectors, performance tuners and mobile phones are common, as are the rings left on the windshield from the suction cups. Some of these devices don’t include a mount requiring you to pay $30+ for $3 worth of molded plastic and suction cup. Others come with a mount that is difficult to replace or you end up trying some imported knock-off that breaks a week later. There just never has been a perfect solution for everything. At least that was my impression before RAM Mounts sent us their X-Grip.
The X-Grip may be universal, but don’t say it in the same breath as any other mount. Out of the box you can feel it’s quality, by its weight alone. There is as much, if not more, metal in the X-Grip as there is plastic. If you accidentally drop it it won’t shatter into a dozen pieces. If anything it might chip the asphalt where it landed. These are the people who make nearly bomb-proof center consoles for police cars after all. Don’t let the heavy-weight quality worry you though, the suction cup and other mounts don’t fail, but I’m getting ahead of myself.
The X-Grip has two spring-loaded arms that are joined in the center to make an X shape. You can easily put in your device and it is held tightly by the rubber pads on each end of the X’s “feet”. The minimalism of the feet mean you’ll easily be able to access buttons and plugs around the device. The X-Grip’s size is perfect for smart phones in the Apple iPhone range, we also tested it with a TomTom One GPS and SCT Livewire, though the Livewire fit was snug. It was also a good size for our Garmin eTrex GPS. The feet can go as small as 0.875 inches and as large as 3.25 inches. The depth measures 0.875 inches as well.
The back of the X-Grip features the RAM Mounts ball mount. This attaches to an included arm with sockets on both ends. This gives you an endless amount of articulating to place your devices exactly where you want it to be. This arm has a handle in the middle that tightens the grip on both ends. Once you tighten it down it’s not going to move at all. Not even if you try a one-handed adjustment while heading down the road so make sure it’s where you want it in your pre-flight check.
The final piece of the X-Grip depends on your needs. Our unit came with a suction cup mount, but there are mounts for rails, handlebars, cup holders, adhesive mounts, clamp mounts, screw-in mounts and even a mount for your motorcycle’s brake/clutch reservoir. While suction cups are often known the fail the secure clamp on this mount never had us worrying despite some abusive roads on our road trips. The RAM ball mounts make it easy to move the X-Grip (or other RAM Mounts products) between settings. Our X-Grip moved easily from our truck windshield to our ATV handlebars in place of our RAM Mounts Aqua Box allowing us to swap a handle bar mounted iPhone for a handheld GPS.
If you have already bought into how incredible RAM Mounts systems are then adding the X-Grip will only set you back another $22.84 (Part number RAM-HOL-UN7BU). If you don’t have any mounts then a X-Grip set starts at $30.41 with an adhesive mount and goes as high as $65.13 with a cup holder mount. Considering the replacement mount for my busted TomTom One is $24.95 the X-Grip is a deal. And chances are it will work on the next device you get too. Interested in carrying a tablet or Apple iPad? They have an X-Grip for that too!
For more details or to order a Made in America X-Grip for yourself check out RAM Mounts at http://www.rammount.com/NewProducts/RAMxgripmount/tabid/4515/Default.aspx.
Ram Mount has incredibly poor customer service. Evan is not helpful, and he essentially blocks access to escalation.
Founder Jeff Carnevali insulates himself from customers.
Sales Director Wade Hickson plays word games and is not at all helpful.
The company filters out and deletes negative comments and reviews on Facebook. Pretty shameful.