REVIEW: Goal Zero Venture 30

We live in a very technological age. And even when we are ready to hit the trails and get away from it all we still depend on having our phones, cameras, GPS and other devices. Portable batteries have become common place, but most weren’t made to handle the trails or Mother Nature. For the last year we’ve been testing the Goal Zero Venture 30 and Nomad 7 products and they have you taken care of.

Goal Zero Venture 30

I utilize the same devices on the trails and camping as I do when I’m in the field training with the US Army, so before a field exercise I picked up the Goal Zero Venture 30 Recharger and the Nomad 7 Solar Panel. Both products are designed for the adventurer and whatever elements they might find themselves in.

Goal Zero Venture 30

The Goal Zero Venture 30 is a portable battery pack with an IPX6 weather rating. This International Protection Marking code means that the Venture 30 has been certified with testing against 10 minutes of dripping water, 5 minutes of spraying water, 5 minutes of splashing water and 3 minutes of powerful water jets at 100 liters per minute! And it’s operating temperature range is from 32-114 degrees Fahrenheit (0-45C). Weighing in at only 8.8 ounces it won’t add much to your pack. The Li-ion battery is 29Wh and 7800mAh. When looking at batteries, the bigger these 2 numbers are, the better. Wh refers to watt-hours meaning, in this case, the Venture 30 could power a 29 watt light bulb for 1 hour, or a 5 watt phone for 6 hours, etc.

Goal Zero Venture 30

The Goal Zero Venture 30 compared to a 4000mAh PocketJuice.

The Goal Zero Venture 30 has 2 USB ports and a built in mini-USB cable so many phones and cameras won’t even need to bring along extra cords. Apple devices on the other hand…I digress. Charging the Venture 30 from dead off USB power takes about 5 hours. We tested it through wall power, off a computer and off a 12 volt car plug all with the same result. Output is impressive too. We ran an Apple iPhone 6 through our normal work day only using the Venture 30 to charge it. We got two and half days off the Venture 30. Off a fully charged Venture 30 you should be able to charge a smartphone 2.5 times, a GoPro camera 5 times and a tablet once. To save on time you can plug devices in while the Venture 30 is being charged back up as well.

The Goal Zero Venture 30 has 5 LED lights across the front with a button on either side. Pressing one of the buttons will light up the LEDs in blue to indicate how much of a charge the Venture 30 has on a scale of 1-5. The opposite button will cause the LEDS to glow white as a backup flashlight. You can cycle through 3 brightness modes and 2 strobe modes.

Goal Zero Venture 30To give us the most versatility we also picked up the Goal Zero Nomad 7 solar panel. The Nomad 7 is a lightweight, weather-resistant, 7-watt solar panel that can be used to charge the Goal Zero Venture 30 or directly charge your smartphone, GPS or GoPro (no tablets). It has clipping points all around it to it can be easily strapped to a backpack or rack for charging on the go. The Nomad 7 will charge a Venture 30 from scratch in 8-16 hours depending on the amount of sun you are getting. You can chain multiple solar panels together to charge quicker. The Nomad 7 has a pocket built into itself to hold cables and the Venture 30 while it’s charging.

Goal Zero Venture 30

Goal Zero is a US company founded in 2009 and is focused on making power available whether you are off-grid or facing a natural disaster. They have a large line of solar panels, battery and recharge systems and accessories like lights and speakers all made to accompany your adventures. The Goal Zero Venture 30 has an MSRP of $99.99 and the Nomad 7 has an MSRP of $79.99. You can also buy them as a kit to save $10. I’ve bought and broken or lost enough of the cheap batteries packs to have paid for my Venture 30 already and those couldn’t withstand the outdoors. Goal Zero has done a great job with these two solutions. We haven’t found a better offering yet. To find your own check out #solarlife

Goal Zero

REVIEW: RAM Mounts Aqua Box Pro

Looking back at our beginnings our very first review was on the RAM Mounts Aqua Box. Still, after all this time, it’s our most used accessory. Maybe we have trouble severing the ties with our work lives that we have to have our phones on the trail. Maybe it’s the hope that our cell signal will be good enough to show the satellite view to get us unlost if needed. Or maybe it’s because we want to quickly call 911 for a medevac the next time someone (who shall not be named) stalls climbing a steep hill and decides to let their ATV ride them back down. Either way the Aqua Box is a staple to our rides. So when we picked up our 2014 Honda Rancher one of our first calls was to RAM Mounts for a new one. Technology changes daily and the engineers behind the Aqua Box haven’t been idle either. They introduced us to the Ram Mounts Aqua Box Pro, a new line that provides even more options.

RAM Mounts Aqua Box Pro

The RAM Mounts Aqua Box (left) and the RAM Mounts Aqua Box Pro (right).

The RAM Mounts Aqua Box Pro differs from the original Aqua Box in several ways. The Aqua Box Pro is still weather-resistant/splashproof, though not quite as much as the original. It’s quick release system allows the Pro to be removed from the mount and carried in your pocket. The new membrane allows full control of buttons on the front and sides of the device as well as full control of the screen, even swiping. The back of the Pro is clear allowing photos and videos to be taken without removing the device from the Aqua Box Pro. There is even a little extra room in the case to hold a few small items like identification. As an added bonus the Pro floats, just in case.

RAM Mounts Aqua Box Pro

The RAM Mounts Aqua Box Pro is available in 3 sizes. The Pro 10 is sized for early generation versions of the Apple iPhone, without any case. The Pro 20 i5 is designed to fit the Apple iPhone 5 without any case. And the Pro 20 is designed to fit iPhones with cases as well as most other phones with interior dimensions of 2.8″ wide, 5.38″ high and 0.55″ deep. Being a big fan of protective cases we opted for the RAM Mounts Aqua Box Pro 20.

RAM Mounts Aqua Box Pro

In our testing we were using Apple iPhone 4s and 5 devices housed in Otterbox cases. Swiping works good as well as most screen inputs. I did find that I had a hard time getting the Done button to respond when trying to unlock the screen. So much so that a crease has formed in the clear cover. This only seems to be an issue when using buttons in the corners of the screen. Other phone makes or using an iPhone without an Otterbox may have worked better. Navigating through Apps, photos, music, etc all ran smoothly otherwise. Also keep in mind that the Aqua Box Pro is not waterproof, so if you like to walk your snorkled quad across ponds then you should stick to the original Aqua Box. I had no issues during normal riding and mudding, but my phone did get wet at the bike wash afterwards.

RAM Mounts Aqua Box Pro

Overall the RAM Mounts Aqua Box line is a great solution for keeping your device accessible on a ride. You riding style or conditions may determine what model is best for you. Our setup as shown carries a reasonable MSRP of $61.06 and includes a lifetime warranty. Additionally, like all RAM Mounts gear, it’s made in the USA. To pick out your own RAM Mounts Aqua Box Pro or other gear from Ram Mounts see

REVIEW: RAM Mounts X-Grip

Chances are you have some type of device mounted on your windshield or dash. GPS, radar detectors, performance tuners and mobile phones are common, as are the rings left on the windshield from the suction cups. Some of these devices don’t include a mount requiring you to pay $30+ for $3 worth of molded plastic and suction cup. Others come with a mount that is difficult to replace or you end up trying some imported knock-off that breaks a week later. There just never has been a perfect solution for everything. At least that was my impression before RAM Mounts sent us their X-Grip.

Image courtesy of RAM Mounts

The X-Grip may be universal, but don’t say it in the same breath as any other mount. Out of the box you can feel it’s quality, by its weight alone. There is as much, if not more, metal in the X-Grip as there is plastic. If you accidentally drop it it won’t shatter into a dozen pieces. If anything it might chip the asphalt where it landed. These are the people who make nearly bomb-proof center consoles for police cars after all. Don’t let the heavy-weight quality worry you though, the suction cup and other mounts don’t fail, but I’m getting ahead of myself.

The X-Grip has two spring-loaded arms that are joined in the center to make an X shape. You can easily put in your device and it is held tightly by the rubber pads on each end of the X’s “feet”. The minimalism of the feet mean you’ll easily be able to access buttons and plugs around the device. The X-Grip’s size is perfect for smart phones in the Apple iPhone range, we also tested it with a TomTom One GPS and SCT Livewire, though the Livewire fit was snug. It was also a good size for our Garmin eTrex GPS. The feet can go as small as 0.875 inches and as large as 3.25 inches. The depth measures 0.875 inches as well.

The back of the X-Grip features the RAM Mounts ball mount. This attaches to an included arm with sockets on both ends. This gives you an endless amount of articulating to place your devices exactly where you want it to be. This arm has a handle in the middle that tightens the grip on both ends. Once you tighten it down it’s not going to move at all. Not even if you try a one-handed adjustment while heading down the road so make sure it’s where you want it in your pre-flight check.

The final piece of the X-Grip depends on your needs. Our unit came with a suction cup mount, but there are mounts for rails, handlebars, cup holders, adhesive mounts, clamp mounts, screw-in mounts and even a mount for your motorcycle’s brake/clutch reservoir. While suction cups are often known the fail the secure clamp on this mount never had us worrying despite some abusive roads on our road trips. The RAM ball mounts make it easy to move the X-Grip (or other RAM Mounts products) between settings. Our X-Grip moved easily from our truck windshield to our ATV handlebars in place of our RAM Mounts Aqua Box allowing us to swap a handle bar mounted iPhone for a handheld GPS.

If you have already bought into how incredible RAM Mounts systems are then adding the X-Grip will only set you back another $22.84 (Part number RAM-HOL-UN7BU). If you don’t have any mounts then a X-Grip set starts at $30.41 with an adhesive mount and goes as high as $65.13 with a cup holder mount. Considering the replacement mount for my busted TomTom One is $24.95 the X-Grip is a deal. And chances are it will work on the next device you get too. Interested in carrying a tablet or Apple iPad? They have an X-Grip for that too!

For more details or to order a Made in America X-Grip for yourself check out RAM Mounts at

REVIEW: Polaris ORV Trails App

Recently, Polaris Industries released an app for Apple and Android devices. ORV Trails is one of a suite of apps created by Polaris that includes Indian Rides and Victory Rides for the streets, and Polaris Snow Trails. The app includes several handy features like live GPS tracking of your venture, weather conditions, waypoint placing and locating local services.  Here is the full feature list from the iTunes store:

– display your current location
– view maps of US ORV trails
– view weather conditions and advisories for any US location
– find and contact Polaris dealers
– local services search with integrated direct dialing, including gas stations, restaurants and lodging
– save waypoints along your route
– track and save multiple ORV routes
– automatic map caching so maps can still be viewed while on the trail and outside of data coverage areas
– multitasking on iOS4 for route tracking in the background
– share saved routes to Twitter or Facebook
– export route data in GPX or CSV format


This trail might not be a good option today.

Admittedly, most of these aren’t particularly new items. Most smartphones have built-in maps, GPS, weather and can easily locate the nearest fuel, food and lodging. There are also apps for tracking our routes and adventures. However, there are few options that combine all of this info in one convenient app that is directly targeted at riders like you. As a bonus, there are thousands of trails already posted in the app. It also provides a unique method for mapping areas you may often ride, but have trouble seeing in full due to tree cover. The ability to place waypoints is a great feature too. Think “great hunting spot” or “great view from here”. The number of uses is endless and certainly not limited to ATVing.

The red and orange represent trails.

Perhaps the best thing about the Polaris ORV Trails app is that it’s free. To be completely honest it would have to be a really bad app to get a poor review when it’s free. However, there isn’t much negative to say about the Polaris ORV Trail app.  The app is available for Apple devices and Google Android devices. There is also a PC desktop version. More details are available here:


Apple Devices:

Android Devices: